Cord and plug connected equipment shall be connected to an equipment grounding conductor by which of the following means?

The arrangement of grounding connections shall be such that the disconnection or removal of _______________ fed from the box does not interfere with or interrupt the grounding continuity.

Equipment grounding conductor connections at the source of separately derived systems shall be made in accordance with article _______?

Contact devices or yokes designed and listed as self grounding shall ______________ in conjunction with the supporting screws to establish equipment bonding between the device yoke and flush-type boxes.

An equipment bonding jumper shall be sized in accordance with Table __________?

T/F: Where equipment is grounded and is supplied by separate connection to more than one circuit or grounded premises wiring system, an equipment grounding conductor termination shall be provided for each such connection as specified in 250.134 and 250.138.

For supply-side equipment: A grounded circuit conductor shall be permitted to ground non-current-carrying metal parts of equipment, raceways, and other enclosures at which of the following locations:

Under the conditions specified in 250.136(A) and (B), the ________________________ of the equipment shall be considered grounded.

Isolated sections of metal raceway or cable armor, where required to be grounded, shall be connected to an equipment grounding conductor in accordance with which article?

The equipment grounding conductor of a grounding-type receptacle or a branch circuit extension shall be permitted to be connected to any accessible point on the ground electrode conductor according to article: